Assembly; Crate Removal; Optional Ash Cleanout System -(Install Fi Rst); Pedestal Kit - Pacific energy SUPER 27 Installation And Operating Instructions Manual

Super 27 - Pedestal Model
Super 27 - Leg Model

Assembly

Crate Removal

1) Carefully remove wood top and supports.
2) Remove plastic cover.
3) Using a 7/16" wrench, remove lag bolts that secure
stove body to bottom pallet.
4) Place stove body carefully on its back.
5) Using two 3/4" wrench, remove 1" x 1/2" bolts and
save for later use.
6) Remove pallet retaining brackets from stove bottom.
Optional Ash Cleanout System
fi rst)
1) With stove body laying on its back, remove the ash
system hole cover and gasket located under the stove.
Discard cover plate and gasket.
2) Inside the stove, remove the two bolts for the ash dump
from the fi rebox bottom and insert into the brick retainer
with the fl anges on the the brick retainer pointed away
from the threads on the bolts.
3) Replace bolts with brick retainer in the firebox
bottom.
4) Place new gasket provided over existing bolts.
5) Install ash dump system over gasket and secure with
two nuts previously removed.

Pedestal Kit

1) With the unit on its back and the removable cover
facing up, align the pedestal mounting holes with the
holes on the stove.\
6 SUPER-SD1
- Super 27 only -
2) Secure in place with 1" x 1/2" bolts previously re-
3) Carefully place the unit in the upright position.

Leg Kit

1) With the unit on its back, align the ash drawer enclo-
2) Position the legs over top of the same holes on the
2) Secure in place with 1" x 1/2" bolts previously re-
-(Install
3) Carefully place the unit in the upright position.
Spectrum
Spectrum Classic
moved.
sure mounting holes (removable cover facing up) with
the holes on the stove.
stove.
moved.
300913-24