Specifications; Precautions - Oregon Scientific SE331 User Manual

SPECiFiCATiONS

CLOCK
Time format 2/24 hour format with hour / minute
Date format DD.MM.YY or MM.DD.YY
Year range 200 - 2059
TRAiNiNg
Target heart 50-60%; 6-70%; 7-80%; 8-90%;
rate zone 9-00%
Maximum
99 records
memory
Calorie range 0 to 9,999 kcal
POWER
Watch  x CR2032 3V lithium battery
Chest belt  x CR2032 3V lithium battery
OPERATiNg ENviRONMENT
For watch:
Operating 0˚C to 40˚C
temperature For chest belt:
5˚C to 40˚C
Storage For watch and chest belt:
temperature -20˚C to 60˚C

PRECAUTiONS

To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using the
product:
•
Should the unit experience an electrostatic discharge,
it may trigger the watch to change modes or displays.
Simply press MODE/- to exit or to toggle back to previous
display. This is normal.
•
Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use luke warm water and mild soap to clean
the watch and chest belt thoroughly after each training
session. Never use the products in hot water or store
them when wet.
•
Do not bend or stretch the transmitter part of the chest
belt.
•
Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
treatment may result in malfunction.
•
Do not tamper with the internal components. Doing
so will terminate the product warranty and may cause
damage. The main unit contains no user-serviceable
parts.
•
Do not scratch hard objects against the LCD display as
this may cause damage.
•
Take precautions when handling all battery types.
•
Remove the batteries whenever you are planning to
store the product for a long period of time.
•
When replacing batteries, use new batteries as specified
in this user manual.
•
The product is a precision instrument. Never attempt
to take this device apart. Contact the retailer or our
customer service department if the product requires
servicing.
•
Do not touch the exposed electronic circuitry, as there is
a danger of electric shock.
•
Check all major functions if the device has not been
used for a long time. Maintain regular internal testing
4