Clear Records; Other Operations And Settings; Activate Backlight; Beep Tone On / Off - Oregon Scientific SE331 User Manual

CLEAR RECORDS

This watch can contain data for up to 99 exercise sessions.
Individual memory cannot be selected and deleted. The
watch only allows for all data to be deleted.
To delete memory:
. Press MODE/- repeatedly to select "MEM".
2. Press +/ST/SP repeatedly until "DELETE" will be
displayed.
3. Press MODE/- to confirm.
DONE indicates the record has been cleared.
MODE/-
When starting an exercise and memory is full, "FULL" will be
displayed, followed by "DELETE".
•
Press MODE/- to delete all records
OR
•
Press +/ST/SP to ignore and start an exercise without
recording data for it.
+/ST/SP
MODE/-

OTHER OPERATiONS AND SETTiNgS

ACTivATE BACKLigHT

Press EL/LOCK. (Press any key to extend backlight for
another 5 seconds).
NOTE
The backlight function will not operate if " " is
displayed.

BEEP TONE ON / OFF

When time is displayed, press +/ST/SP to activate /
deactivate beep tone.
indicates beep tone is deactivated.

REPLACE BATTERY

If the battery power of your watch or chest belt is low, the
watch will display:
Watch
Chest belt
To replace watch battery:
2
"HR BELT LOW BATT"