Table of Contents
Advertisement
Core Kontrol D4i
Setting a hot cue point in play mode
During play mode, push the desired hot cue (1/2 beats (04), 2/4 beats (15), 3/8 beats (22), 4/16
•
beats (23)) button.
•
The hot cue point is stored while playback resumes.
The hot cue point will be indicated in the waveform display as shown in figure 6.
•
Deleting a hot cue point
Push and hold the shift (47) button while tapping the corresponding hot cue button (1/2 beats (04),
•
2/4 beats (15), 3/8 beats (22), 4/16 beats (23)) to delete a hotcue point.
Cueing
•
"Cueing" is the action of preparing for playback.
Push the cue (10) button, the player will enter cue mode, playback returns to the cue point and the
•
deck will enter pause mode, the cue (10) button lights up and the play (28) button flashes.
When the play (28) button is pushed, playback will start from the cue point.
If the cue (10) button is pushed after the search operation or the scanning operation, playback
•
returns to the cue point and the deck will enter pause mode.
NOTE: While in cue mode, and the cue (10) button is pushed and hold, playback will start from the cue
point, when the button is released, the player will return to the cue mode automatically, it allows you to
check the cue point.
Seek (fast forward/fast backward)
Seeking is a function used for for moving quickly forward or backward through a track
while pushing and holding the shift (47) button and turning the jogwheel (09).
Push and hold the shift (47) button while turning the jogwheel. The track will play fast forward or fast
•
backward and the sound is audible.
•
Turn the jogwheel clockwise to scan in forward direction, counterclockwise to scan in reverse
direction.
Changing pitch of the song
Set the desired pitch bend range for the pitch control fader (5) by pushing and holding the shift (47)
•
button and tapping the keylock/pitch (08) button. Make sure that the pitch control fader (05) is
activated (keylock/pitch (08) button is lit).
Adjust the BPM by sliding the pitch control fader (05) up or down.
•
Slide the pitch control fader (05) up to decrease BPM, or down to increase BPM. The adjustment
•
range is +/- 8%, 16%, 50 or 100% depending on the range previously set up.
Pitch bending
•
Turn the jogwheel during playback of a track to change the BPM temporarily.
Turn the jogwheel (09) clockwise during play to increase the BPM and counterclockwise to decrease
•
the BPM. The faster you turn the wheel, the more the BPM changes. The adjustment range is +/- 20%.
When you release the jogwheel (09), the track will return to the BPM set with the pitch control fader
•
(05).
Ordercode: D1260
15
Fig. 06
Advertisement
Table of Contents
