Turning Handset Power On/Off - SoftBank 810T User Manual

Table of Contents

Advertisement

1
Connect the In-Car Charger to Handset
1
The inscription on the In-Car Charger connector should face up.
2
Insert the plug into the cigarette lighter socket in
a car
Charging Indicator lights red and charging begins.
3
After Charging Indicator goes out, remove the
plug from the cigarette lighter socket
4
Remove the In-Car Charger from Handset
Press and hold Release Buttons to remove the In-Car Charger from
Handset.
Note
7
Do not use the In-Car Charger when the car engine is not running.
Doing so may drain the battery.
If you move away from the car, unplug the In-Car Charger. In a car
7
where the cigarette lighter socket works even after removing the car key
(the Charging Indicator illuminates even after removing the car key),
leaving the In-Car Charger plugged in may drain the battery.
Use of the handset while driving is prohibited by law. Before using the
7
handset, stop the vehicle in a safe area where parking is permitted.
1-14

Turning Handset Power On/Off

Turning Handset Power On
1
Press and hold O
The power is turned on and the Standby screen appears.
Tip
7
After you turn on your handset, it does the following.
・ A wake-up alarm sounds (page 12-4).
・ The Charging Indicator illuminates.
・ The Camera/Video Indicator illuminates.
・ The External Light flashes.
If PIN1 Setting (page 13-1) is set to Activate, enter your PIN1 code.
7
The following windows appear the first time you turn on the power of
7
your handset or after performing Reset All or Reset Setting (page
13-5).
・ Date&Time Settings (page 1-15)
・ Retrieving Network Information (page 1-15) (appears when you press
@ ,
a
J or
j
K in Standby)
k
Turning Handset Power Off
1
Press and hold O
The power is turned off.

Advertisement

Table of Contents
loading

This manual is also suitable for:

813t811t

Table of Contents