Lamp Settings; Maintenance Timer - Infinity IB-16R User Manual

Infinity iB-16R
04) Once you have selected the desired mode, press the
05) Press the
06) Two menus have different options to the regular, YES or NO function:
 Pan Angle: 540°, 360°, 180°
 Tilt Angle: 270°, 180°, 90°

3.1. Lamp settings

With this menu you can set the lamp settings.
01) Press the
02) You can now adjust the following options:
 ON/OFF (Set whether the lamp is ON/OFF, on start-up)
 STATE/POWER ON (Set whether the lamp is ON, once electrical power is received)
 OFF VIA DMX (Switch the lamp ON via DMX)
 ON IF DMX ON (The lamp is ON when a DMX signal is received)
 OFF IF DMX OFF (The lamp is OFF when no DMX signal is received)
 IGNITION DELAY (0-255, Lamp trigger delay)
 LOW POWER DELAY (0-255)
 RESET LAMP TIME (YES/NO)
03) Once you have chosen the desired option, press the
04) Press the

3.2. Maintenance Timer

With this menu you can reset the device's counters.
01) Press the
menu.
02) Press the
 INTERVAL (0-250, maintenance interval)
 REMAIN TIME (NO-RESET, countdown)
03) If you select INTERVAL, press the
04) Press the
05) Press the button to confirm.
06) If you select REMAIN TIME, press the
07) Press the
08) Press the button to confirm.
Ordercode: 41532
buttons to change the value from NO to YES.
buttons to select LAMP SETTINGS and press the
buttons to select YES or NO and press the
buttons to select MAINTENANCE TIMER and press the
buttons to choose one of the 2 options:
button to open the selection menu.
buttons to set the maintenance interval. The adjustment range is between 0-250.
button to open the selection menu.
buttons to set the REMAIN TIME to No/Reset.
button to proceed to edition.
button to enter edition mode.
button again, to confirm.
20
button to open the menu.
button to open the