Transfer Audio Or Replacing With New Wireless Device; Wireless Link Lost - Motorola PMLN6716 User Manual

IMPORTANT:
If the wireless PTT paired with the Mobile Microphone
Gateway before the audio device, the pairing will be
saved but the wireless PTT will be disconnected. The
wireless PTT will connect when an audio device is
connected.
Align
Figure 3.4: Pairing your Mobile Microphone Gateway with a wireless PTT
NOTE:
When the Wireless PTT is low in power, your WRSM
indicates a low battery tone.
Transfer Audio Or Replacing With New
Wireless Device
Procedure:
1
Press the PTT button on the Mobile Microphone Gateway to route
the audio back to the Mobile Radio.
2
Alternatively, place the blue dot (secure pairing spot) on the WRSM
within one inch of the blue dot (secure pairing spot) on the Mobile
Microphone Gateway. The audio will route between the Mobile
Radio/Mobile Microphone Gateway.
3
Unmuting on the WRSM will transfer audio to the WRSM.
4
In case of PTT button is pressed on both the Mobile Microphone
Gateway and the WRSM, the Mobile Microphone Gateway will have
priority.
To Pair With A New Wireless Device:
Follow the procedure from "Pairing Your Mobile Microphone Gateway
with WRSM" on page 21 for new pairing.
NOTE:
If the Mobile Microphone Gateway has been paired with a
WRSM and needs to now be paired with a different device,
the Mobile Microphone Gateway does not have to clear its
previous pairing. The previous pairing will be cleared
automatically when pair with a new device.

Wireless Link Lost

In the event of interference, or if the Mobile Microphone Gateway is
prompted with Poor Signal / Out Of Range indicator, the link between
the WRSM and Mobile Microphone Gateway may be lost.
If the link between the WRSM and Mobile Microphone Gateway is lost,
the received audio is automatically routed back to the speaker of the
radio.
21
English