Detaching the Battery
To detach the battery, lift up the battery latch and pull the battery
backward until the battery is fully disengaged from the back chassis.
Figure 2.3: Removing the battery from the WRSM
1
2
Charging the Battery
Figure 2.4: Charging position of the WRSM with battery attached
To avoid a possible explosion:
!
!
•
Do not replace the battery in any area labeled
ARNING
"hazardous atmosphere".
•
Do not discard batteries in a fire.
The Motorola-approved battery shipped with your WRSM is uncharged.
Prior to using a new battery, fully charge the new battery to ensure
optimum capacity and performance.
3
English