Language Selection - Motorola PMLN6716 User Manual

NOTE:
When charging a battery attached to a WRSM, turn the
WRSM OFF to ensure a full charge.
Battery Charger
To charge the battery, place the battery, with or without the WRSM, in a
Motorola-approved charger. When initially inserting the battery into the
charger, LED of the charger will turn red. Do not use WRSM until the
LED turns Green.
The LED indicates the charging progress; see Chapter 4 and Chapter 5
or the label printed on the charger.
Align the slot of the battery with the rail of the charger and slot in. Refer
to Figure 2.4.
4
English

Language Selection

Power ON the WRSM by pressing and holding Power Button until you
hear the language selection prompts.
Follow the procedure below if you want to reset to your desired
language.
Procedure:
1
Hold the Power Button for 6 seconds after the power up LED
indication illuminated to enter the language selection feature.
2
Select your desired language by pressing the PTT button. Refer to
Table 2.1 below for the Language Selection Indicators.
Table 2.1: Language Selection Indicators
State Power Indication LED
Language Selection LED illuminated
Voice Prompt
"For English press PTT
now" (Menu selection
prompts)