Download
Share
Print this page
GeoVision GV- DFR1352 Installation Manual
  1. Manuals
  2. Brands
  3. GeoVision Manuals
  4. Card Reader
  5. GV- DFR1352
  6. Installation manual
GeoVision GV- DFR1352 Installation Manual

GeoVision GV- DFR1352 Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
GV- DFR1352 Card Reader
The GV-DFR1352 is a card reader designed to recognize identification cards. Featured with
the Wiegand and RS-485 outputs, the unit can be connected to any standard access control
panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor
use.
1. Packing List
1. GV-DFR1352 Card Reader
2. Screw x 2
3. Screw Anchor x 2
4. Front Cover Plate x 2
5. GV-DFR1352 Software CD
2. Installation
Install the GV-DFR1352 to the door frame using the supplied screws and screw anchors.
Before placing and sticking the front cover plate to the GV-DFR1352, remove the Plastic
Cover to prevent scratches to the cover after installed.
April 24, 2014
Front View
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the GV- DFR1352 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GeoVision GV- DFR1352

Summary of Contents for GeoVision GV- DFR1352

  • Page 1 GV- DFR1352 Card Reader The GV-DFR1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
  • Page 2 3. Electric Wire Wire Color Function DC 12V Black Yellow Beeper Orange Green LED Light Red Red LED Green Wiegand Data 0 White Wiegand Data 1 Blue RS-485 + Light Blue RS-485 - Gray Rear View Purple Brown 4. LED Indicator and Beeper In standby mode, the LED is blue.
  • Page 3 5.1 Connecting through Wiegand Interface Up to eight GV-DFR1352 readers can be connected to GV-AS810 Controller through the controller’s Wiegand interface. Wire Color Function Black White Wiegand Data 1 Green Wiegand Data 0 DC 12V 5.2 Connecting through RS-485 Interface Up to eight GV-DFR1352 readers can be connected together to the RS-485 interface on GV- AS810 Controller.
  • Page 4 5.2.1 Defining Readers on GV-AS Controller Web Interface Since multiple readers can connect to GV-AS Controller using one RS-485 interface, you need to specify which door each reader controls. This section explains how to define readers on the Web interface of GV-AS Controller using GV-AS210 Controller as an example. 1.
  • Page 5 1. Insert the software CD. The Install Program window will pop up automatically. 2. Select Install GeoVision USB Devices Driver. 3. In the GeoVision USB Driver Installer window that appears, select Install. 4. Go back to the Install Program window, and select Run GV-Reader Config Utility.
  • Page 6 5. Select the COM port that is connected to GV-DFR1352 and click Open COM. The serial number and firmware version of the reader will be automatically detected. The red square next to the COM port box should change to blue to indicate the COM port is correct. 6.
  • Page 7 6.2 Adding the Reader to GV-System 1. In GV-System, click the Configure button, select Accessories, and select GV Wiegand Capture Device Setting. This dialog box appears. 2. Click the New button. This dialog box appears. Type: Select GV-Wiegand Capture.  Device: Type a number and name to help you identify the reader.
  • Page 8 7. Enabling External Control the Beeper and LED You can change the default settings of the LED and the beeper by enabling a GV-AS400 / 410 / 810 to externally control the LED and Beeper. The GV-AS Controller and the reader need to be connected through Wiegand interface.
  • Page 9 3. Click Open COM. The serial number and the firmware version of the reader will be automatically detected. 4. To enable external control of Beeper or LED, select Beeper, Green LED or Red LED. Beeper: Enables the external control of Beeper. ...
  • Page 10 7.2 Wiring the Beeper and LED to GV-AS400 / 410 / 810 To wire the beeper and LED to GV-AS400 / 410 / 810, connect the control wires of GV- DFR1352’s Beeper, Red LED or Green LED to any of outputs 9 ~ 16 on GV-AS Controller. Wiring LED to GV-AS Controller The diagram below shows the connection for wiring Green LED on GV-AS810.
  • Page 11 7.3 Configuring the Beeper and LED Settings for Each Door/Gate After connecting the wires for Beeper or LED, specify the Beeper or LED settings for each door/gate on the GV-AS400 / 410 / 810 Web interface. 1. On the controller Web interface, click Output Setting. The page below appears. 2.

  • Page 12: Firmware Upgrade

    8. Firmware Upgrade GeoVision will periodically release the updated firmware on the website. You can also find the latest firmware from the Firmware folder in the Software CD. The new firmware can be simply loaded into GV-DFR1352 by using Update Utility included in the Software CD.

  • Page 13: Specifications

    9. Specifications 8-bit microprocessor 13.56 MHz for ISO14443A (Mifare DESFire, Mifare Frequency Plus and Mifare Class) Wiegand Interface Wiegand 26 / 34 bits, distance 30 m / 98.43 ft RS-485 9,600 bps, connect up to 8 GV-DFR1352 units Power DC 7.5V – 12V Red, Green and Blue LED Beeper Buzzer...