Valor 1600IN Installation & Owner's Manual page 42

QUALIFIED
INSTALLER
Logs and rocks
The log and rocks pack contains a center log which
is not being used in this installation. Another log is
provided with the fi replace in a small separate box
and should be used instead.
x
Discard this log from the
log pack
Each log has pegs to help you locate them on
the platform. Install the logs as shown below. The
positioning of the ceramics is shown from the valve
access side of the appliance.
1. Place the rear left log as indicated.
2. Place the right log as indicated.
42
Installation
Use this log instead,
provided with the appliance
3. Place the front left log as indicated.
4. The rear log has two pins underneath and one on
top. It is provided with the appliance as a single log.
Place the rear log in the center of the fi rebox as
indicated.
NOTE: There are two holes for the left peg of this
log. Use the log closer to you so that when the log is
placed you don't see any empty hole.
x
Wrong
5. Place one end of the cross log on the rear center log
as indicated and rest its other end on the platform in
front of the burner.
Right