Table of Contents
Advertisement
OWNER'S
INFORMATION
As well, familiarize yourself with the gas shut-off valve
location in your house. As indicated below, the gas is
running when the handle is parallel with the pipe. The
gas is off when the handle is perpendicular with the
pipe.
ON: parallel to pipe
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
Fireplace
Receiver
Gas valve
The receiver and gas valve are located on the bottom of the
fi replace behind the front panel. The battery holder is located
next to the wall switch.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner can
not come on. The pilot will remain on if it is lit.
•
Gas valve
batteries from the battery box
as well as the battery from the
handset.
10
Owner's Information
OFF:
perpendicular to
pipe
Battery holder
& wall switch
Alternately, remove all
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 15 in the Remote Control
Operation section for a description of this feature.
Advertisement
Table of Contents
