Adjusting The Headlight Beam - MOTO GUZZI V1000 I-Convert Owner's Manual

Number plate light (fig . 35)
Undo screws "F" securing the light glass, push
the bulb inwards and turn it at the same time,
then slip it off.
Instrument panel, Speedometer, Rev, Counter
Take bulb sockets out of instrument panel , spee-
dometer and rev . counter, then replace the bulbs.
Bulbs
Headlight (Europe model) :
- high and low beam
- town driving light
Headlight (U .S.A. model) :
- sealed beam insert
Tail light :
- parking and stop light
- number plate light
Turn indicator lights
Warning lights
Speedometer and rev . counter lights
45/ 40W
3W
45/ 40W
5/ 21 W
5W
21 W
1,2W
3W
35
Adjusting the headlight beam
55
(Iig . 34)
The headlight must always be adjusted at the
right height, either for a safe riding or not to
trouble crossing riders. For the horizontal adju-
sting act· on screw " A ", for vertical adjusting act
on screw " C" until the correct height is reached .
The high beam centre must not be higher than
0,86 m (approx .34" ) measured at 3 m (approx
10" ) distance with motorcycle not on stand rider
on saddle .