MOTO GUZZI V1000 I-Convert Owner's Manual page 19

Horn , flashing light and turn
signals
(fig . 6)
Controls are incorporated in block ,, 8 ,,:
" 6,, HORN Horn control switch .
"7,, FLASH Flashing light (headlight) control
switch.
" 8,, Turn signals control button .
When turned to the right (position 9) ope-
rates the right signals.
When turned to the left (position 10) ope-
rates the left signals.
6
7
Engine starting and emergency
stop button
(fig . 7)
Right, on the handlebar. With the ignition key in
position " 2,, (fig . 5) the engine is ready to be
started .
To start the engine (see " A,,) press button "1,,
(Start) .
To stop the engine (in case of emergency) turn
the lever " 2,, in position " 3,, or «4".
After stopping the engine, set the ignition key
(fig. 5) in position «0".
Note:
To start the engine, always pull the clutch con-
trol lever completely in .
17