Rcv-3000 Logger Track Logging And Mode Setting - Holux RCV-3000 User Manual

RCV-3000 Logger Track Logging and Mode Setting

Data Logging
When the power is turned on, the device will automatically search for satellite positioning (orange
LED on), and then logging will begin. When the power is switched off, the logging will stop. When
the power is turned on again, it will once again conduct satellite positioning and start logging.
GPS Data Logging Mode Setting
1. Install ezTour onto a PC or notebook (see ezTour instructions manual for installation)
2. When the application runs, the following main screen can be seen:
3. From the Menu bar select [Setup GPS Logger] to bring up the settings window
13