Recorder Section - Yamaha AW4416 Service Manual

OMNI OUT
Output impedance
Nominal load impedance
Nominal output level
Maximum output level
PHONES
Nominal load impedance
Maximum output level
DIGITAL STEREO I/O
Option card slot
Digital I/O
Analog input
Analog output
Digital mixer
Input channel (channel 1–24, playback 1–16)
Internal effects return
Bus
Stereo L, R
Bus 1–8
Aux 1–8
Solo L, R
Fader
Frequency response
Dynamic range
(20 kHz, LPF, IHF-A)
Total harmonic distortion
(20 kHz, LPF)

Recorder section

General
Recording resolution
1–4 (unbalanced, phone jack)
1 kΩ
10 kΩ
0 dB
+18 dBV
(unbalanced, TRS phone jack)
8–40Ω
100 mW + 100 mW (40 Ω load)
Coaxial (phono)
Slot × 2
MY-8-AT (Adat)
MY-8-TD (Tascam)
MY-8-AE (AES/EBU)
MY-8-AD (TRS phone jack × 8)
MY-4-AD (XLR-type × 4)
MY-4-DA (XLR-type × 4)
Attenuator, Phase (normal, reverse), EQ (4-band
PEQ), Dynamics, Delay, On/Off, Fader (60 mm
motorized), Pan, Bus assign (stereo, bus, aux,
solo, direct out)
Attenuator, Phase (normal, reverse), EQ (4-band
PEQ), Delay, On/Off, Fader (60 mm motorized),
Pan, Bus assign (stereo, bus, aux, solo)
Attenuator, EQ (4-band PEQ), Dynamics, On/
Off, Fader (60 mm motorized), Balance
Attenuator
Attenuator
60 mm motorized × 17
+1, –3 dB, 20 Hz–20 kHz (MIC/LINE IN to STE-
REO OUT)
109 dB (typical) DA converter (STEREO OUT)
104 dB (typical) AD + DA (LINE IN to STE-
REO OUT)
Less than 0.02% @1 kHz (LINE IN to STEREO
OUT)
16-bit, 24-bit (set per song)
AW4416
5