Yamaha AW4416 Service Manual page 75

AW4416
5-6 Remove the four (4) screws marked [900K].
The CD-RW holder can then be removed. (Fig.3)
5-7 Remove the fifteen (15) screws marked [900L].
The sub chassis can then be removed. (Fig.7)
5-8 Remove the four (4) screws marked [900M].
The LCD support can then be removed. (Fig.8)
5-9
PN-SW circuit board:
Remove the six (6) screws marked [900N].
The PN-SW circuit board can then be removed. (Fig.8)
5-10 LCD:
Remove the two (2) screws marked [930]. The LCD
can then be removed from the LCD support (Fig.9)
5-11 PN-ENC circuit board:
Remove the two (2) screws marked [980]. The PN-ENC
circuit board can then be removed from the LCD
support. (Fig.9)
5-12 PN-INV circuit board:
Remove the four (4) plastic rivets marked [950]. The
PN-INV circuit board can then be removed from the
LCD support. (Fig.9)
[900L]
[900L]
[900L]: Bind Head Tapping Screw-B
3.0 X 8 MFZN2BL (EP600190)
(Fig.7)
34
Sub chassis
[900M]
[980]
[930]
LCD
LCD support
PN-INV
[950]
(Fig.9)
[900M] LCD support
CN401
CN301
[900]: Bind Head Tapping Screw-B
3.0 X 8 MFZN2BL (EP600190)
(Fig.8)
PN-ENC
[930]: Bind Head Tapping Screw-S
2.6 X 8 MFZN2Y (V5679500)
[980]: Bind Head Tapping Screw-S
2.6 X 4 MFZN2Y (VU757900)
[900M]
CN302
PN-SW
CN304
[900N]