Yamaha AW4416 Service Manual page 103

AW4416
4-2 Selecting and Executing a Test
(1) Use the
(2) Press ENTER to run the test.
4-3 Test Result
(1) The test result is indicated to the left of the test item in the menu (see section 4-5, "Test Result Display", below). If the
test ended normally, the screen displays
displays NG.
4-4 Canceling a Test
(1) You can cancel a test that is currently running test by pressing the
4-5 Test Result Display
Result Indication
Ended normally
Ended abnormally
Canceled
5. Tests
With the exception of the SWITCH and LED tests, all tests are the same regardless of the test mode.
5-1 Test Runtime Screens
Test runtime screens differ according to the test. There are four basic screen types, A to D, as shown below.
Test name Indication
Prompts Indication
Prompts & status
Indication
Exit method
Indication
74
or key to move the cursor to the test you wish to run.
(1) Test Screen Type A
. If test ended abnormally or was exited before completion, the screen
CANCEL
Test name Indication
Prompts Indication
Results Indication
Exit method
Indication
key.
(2) Test Screen Type B