Installing The Propeller (19 Spline Shafts) - Mercury 225 Pro XS Manual

1. Shift outboard to neutral.
2. Remove the spark plug leads to prevent the engine from starting.
3. Straighten the bent tabs on the propeller nut retainer (if applicable).
4. Place a block of wood between the gearcase and the propeller to hold
5. Remove the propeller and associated hardware from the propeller

Installing the Propeller (19 Spline Shafts)

Avoid serious personal injury or death. Remove the key from the ignition
switch, disconnect the lanyard stop switch, and remove the spark plug
leads to ensure that the engine does not accidentally start.
Downloaded from www.Manualslib.com
MAINTENANCE
the propeller and remove the propeller nut.
shaft.
manuals search engine
N
ob00351
ob00375
ob00377
WARNING
!
70