Power Tilt Operation (Three‑Ram Trim Systems)
To tilt the outboard, shut off the engine and press the trim/tilt switch or the
auxiliary tilt switch (located on the cowl) to the up position. The outboard
tilts up until the switch is released or it reaches the maximum tilt position.
1. Engage the tilt support lever by pushing the metal stop and rotating
b
2. Lower the outboard to rest on the tilt support lever.
3. Disengage the tilt support lever by raising the outboard off the support
Downloaded from
www.Manualslib.com
FEATURES AND CONTROLS
the knob to bring the support lever upward.
a -
Tilt support lever
b -
Metal stop
c -
Knob
lever and rotating the lever until it locks. Lower the outboard.
manuals search engine
c
44
a
or33-1