Gefen GTV-AUDDEC-N User Manual page 24

When using the IR Remote Control, the INFO | TEST TONE button can be used
to produce a White Noise test tone in order to adjust the output level. The test
tone can also be enabled / disabled via RS-232 (see page 65).
1. Press the MENU button. The front-panel display will change to display the
Speaker Level menu:
MAIN MENU
SPEAKER LEVEL
2. Press the ENTER button. The front-panel display will show the Front
Left speaker level:
SPEAKER LEVEL
FRONT L (+00db)
3. Press the INFO | TEST TONE button on the IR Remote Control to enable
the White Noise test tone.
4. Press the ◄ or ► buttons to adjust the output gain of the Front Left speaker.
SPEAKER LEVEL
FRONT L (+02db)
Once the desired output level has been set, press the INFO | TEST TONE
button on the IR Remote Control to enable the test tone.
5. Use the ▲ or ▼ buttons to cycle through the Center, Front Right, Surround
Right, Surround Left, and Subwoofer and adjust the output gain of each
speaker as necessary.
NOTE: The test tone will automatically be disabled when advancing
to the next speaker channel. Press the INFO | TEST TONE button
on the IR Remote Control to enable the test tone.
6. Press the EXIT button to save the changes and return to the Speaker Level
menu.
MAIN MENU
SPEAKER LEVEL
MENU SYSTEM
Using the IR Remote Control
20