Advertisement
5) When there is an input signal of more than 2 triggers, the monitor displays fully
connected screen (Trigger input screen) as the priority order. And the screen
switsches back when the signal switsches off, the rest will be displayed as the
priority order.
※ TRIGGER PRIORITY ORDER
CAM3 > CAM1+CAM2 > CAM1 > CAM2 > CAM4
NOTICE
CAM1
CAM4
CAM3
Former screen
CAM 2,3,4 simultaneous
CAM1
AUX
Former screen
CAM 1,4 simultaneous
CAM1
AUX
CAM3
Former screen
CAM 1,2 simultaneous
※ If the screen turns to trigger signal, only volume, mute and audio out choice
available.
※ If there is trigger signal input while power off (Stand-by) status, the screen
switsches on and displays choosen trigger line (camera). And the screens turns
off when the trigger signal switsches off.
14
CAM2
CAM 3 signal output
signal input
CAM1
CAM 4 signal output
signal input
CAM2
CAM1
CAM4
CAM 2 signal output
signal input
SETTINGS
5
7" 4CHANNEL DIGITAL MONITOR
Video Standard System, NTSC/PAL conversion
1
If use PAL system on NTSC system using country, it may cause a malfunction. This
products can convert NTSC/PAL system manually but it is not automatic. Before use,
please check and set the system.
NTSC system country : USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO
PAL system country : AUSTRALIA, BELGIUM, CHINA, DENMARK, FINLAND,
Attention
GERMAN, U.K, NETHERLAND, ITALY, KUWAIT,
MALAYSIA, NEW ZEALAND, SIGNAPORE, SPAIN,
SWEDEN, TAILAND, NORWAY.
AV
MODE DOWN/UP
MENU POWER
1) Press SETUP button of remote control
PICTURE SETUP
(or MENU button of monitor) to go into
DIMMER
AUTO
OSD MENU [PICTURE SETUP].
CONTRAST
50
BRIGHTNESS
50
2) Move to VIDEO SYSTEM by pressing
COLOR
50
▼ button of remote control (or MODE
TINT
50
button of monitor) then choose video
LANGUAGE
ENGLISH
VIDEO SYSTEM
NTSC
standard system by pressing ◀▶button
RESET
>
(or DOWN/UP button of monitor)
Dimmer sensor setting
2
※ User can choose DAY/NIGHT/AUTO and it is set AUTO from the factory.
AV
MODE DOWN/UP
MENU POWER
1) Press SETUP button of remote control
PICTURE SETUP
(or MENU button of monitor) to go into
DIMMER
AUTO
OSD MENU [PICTURE SETUP].
CONTRAST
50
BRIGHTNESS
50
2) Move to DIMMER by pressing ▼button
COLOR
50
of remote control (or MODE button
TINT
50
of monitor) then choose by pressing
LANGUAGE
ENGLISH
VIDEO SYSTEM
NTSC
◀▶button (or DOWN/UP button of
RESET
>
monitor)
15
Advertisement
