Connecting And Installation - Camos CM-709M2 Instruction Manual

Screen Information
7
AV MODE DOWN/UP MENU POWER
Press MENU button of monitor or RECALL button of remote control, then it displays
actual screen information (Input mode / Audio output / Volume).
CAM1 CAM2
CAM3 CAM4
VOLUME 30
CAMERA Mirror/Normal mode setting
8
AV MODE DOWN/UP MENU POWER
MIRROR SET
CAM1 MIRROR
CAM2 MIRROR
CAM3 MIRROR
CAM4 MIRROR
18
1) Press SETUP button of remote control
(or MENU button of monitor) to go into
OSD MENU [MIRROR SET].
2) Move to a camera which by pressing
▼button of remote control (or MODE
button of monitor) then choose by
pressing ◀▶button (or DOWN/UP
button of monitor).
※ It is set MIRROR mode from the factory.

CONNECTING AND INSTALLATION

6
7" 4CHANNEL DIGITAL MONITOR
TAPPING SCREW T1 M4.0 X 12 (3ea)
INSERT BOLT (2ea)
FLAT WASHER M3 (4ea)
(1) Clean the place where to install stand and install stand firmly after remov-
ing protect tape of stand bottom.
(2) Fix the stand with enclosed screws.
(3) Assemble the monitor to stand and fix it in the right angle.
(4) Connect cable as follows.
NOTICE
VELCRO TAPE
PORON TAPE
※ Installation can be changed as user's pleasure. (Sunvisor – Option)
⑤
⑥
⑥
19