Using Tape-2 Monitor - Onkyo A-DS650 Instruction Manual

Using TAPE-2 MONITOR

SYSTEM
DOLBY SURROUND
P R O • L O G I C
Re-EQ
TM
STAND-BY
POWER
ON OFF
HIGH DEFINITION
MULTIPLE SOURCE
REMOTE SYSTEM
PHONES
1
TAPE-2
MONITOR
Remote controller
TAPE-2
A-DS650
R L
OUT
(REC)
IN
(PLAY)
TAPE 2
TAPE-2
MONITOR
1
DVD VIDEO-1
VIDEO-2
VCR-1
VCR-2/TV
SMART SCAN CONTROLLER
SURROUND
ENTER
PARAMETER
SPEAKERS
MAIN REMOTE 3-D BASS
MIDNIGHT
REC OUT MULTI SOURCE Re-EQ
THEATER
MIN
DIGITAL AUDIO
SELECTOR
BASS
INPUT MULTI-CH DVD VIDEO-1 VIDEO-2 TAPE-1 TAPE-2 TUNER PHONO C D
SELECTOR ® INPUT VCR-1 VCR-2/TV M D MONITOR
AUDIO VIDEO CONTROL AMPLIFIER
TAPE 2 MONITOR
Input selector
TAPE-2 MONITOR
Graphic equalizer
R L R L
INPUT
OUTPUT
R L
PLAY
REC
Cassette Tape Deck
TAPE-1 TAPE-2 TUNER PHONO C D
M D
MONITOR
MASTER VOLUME
MAX
TREBLE
A-DS650
Playing back using TAPE-2 MONITOR
Using the amplifier or remote controller:
1. Press the TAPE-2 MONITOR (or TAPE-2) button.
The TAPE-2 MONITOR indicator lights up on the display.
2. Follow the operating instructions for the TAPE-2 tape
deck to start playback.
•
If you have selected the MULTI-CHANNEL INPUT,
turning TAPE-2 MONITOR on will automatically select
the audio signal of the selected video input as an input.
•
If you are not using the component connected to the
TAPE-2 connectors, make sure that the TAPE-2 MONI-
TOR indicator is off. Otherwise you won't be able to lis-
ten to other sources.
Using a graphic equalizer
1. Connect the graphic equalizer to the TAPE-2 connec-
tors on the rear panel of the A-DS650.
PLAY
REC
2. If a second tape deck is used, connect it to the tape
deck connectors on the graphic equalizer.
3. Press the TAPE-2 MONITOR button.
The TAPE-2 MONITOR indicator lights up on the display.
4. Follow the operating instructions for the graphic equalizer.
To record an equalized signal, use the tape deck con-
nected to the equalizer.
CAUTION:
•
Do not select a Surround mode when using the equalizer.
Otherwise, it will result in distortion and possible damage
to the Surround decoder circuitry.
Recording using TAPE-2 MONITOR
Using the amplifier:
1. Press an input selector button to select the source to be
recorded.
2. Start recording using the TAPE-2 tape deck, then start
playing the selected source.
Refer to the tape deck owner's manual for more details.
•
If the TAPE-2 MONITOR indicator in the display is not
lit, you will hear the sound from the source.
•
If a 3-head tape deck connected to the TAPE-2 connectors
is used for recording, press the TAPE-2 MONITOR but-
ton to turn on the TAPE-2 MONITOR indicator and listen
to the sound that was just recorded.
•
Set the recording level with the controls on the recording
tape deck.
SUBROOM
SENDING/
A B LEARN
LEARNING
SUR
TEST
POWER SLEEP DIMMER MODE
TONE
SOURCE SELECTOR MULTI-CH
DVD VIDEO-1 VIDEO-2 INPUT
TAPE-2
TAPE-1 TAPE-2 TUNER PHONO C D
PROGRAMMABLE AREA TV/VIDEO
POWER C H VOLUME
POWER
TV/VCR
TUNER
GROUP PRESET
CD TAPE
DISC
SUBTITLE DVD
ON/OFF
PAUSE
/STEP CH SEL
LEVEL VOLUME
MUTING
/REMOTE
SPEAKER
REMOTE CONTROLLER RC-374M
25