Onkyo A-DS650 Instruction Manual page 17

Basic operation
DIGITAL AUDIO SELECTOR
SPEAKERS MAIN
SYSTEM
DOLBY SURROUND
P R O • L O G I C
Re-EQ
TM
STAND-BY
POWER
ON OFF
HIGH DEFINITION
MULTIPLE SOURCE
REMOTE SYSTEM DIGITAL AUDIO
SELECTOR
PHONES
INPUT
SELECTOR ®
MULTI-CH INPUT
1
INPUT MULTI-CH DVD VIDEO-1
SELECTOR ® INPUT VCR-1
DVD
TAPE-1
2, 3
DIGITAL AUDIO
SELECTOR
ANALOG
3-D BASS
MASTER VOLUME
SMART SCAN CONTROLLER
SURROUND
ENTER
PARAMETER
SPEAKERS
MAIN REMOTE 3-D BASS
MIDNIGHT
REC OUT MULTI SOURCE Re-EQ
THEATER MIN
BASS
MULTI-CH DVD VIDEO-1 VIDEO-2 TAPE-1 TAPE-2 TUNER PHONO C D
INPUT VCR-1 VCR-2/TV M D MONITOR
AUDIO VIDEO CONTROL AMPLIFIER
BASS
Input selector
TAPE-1
VIDEO-2 TAPE-2 TUNER PHONO
VCR-2/TV M D MONITOR
Remote controller
SOURCE SELECTOR
VIDEO-1 VIDEO-2
TAPE-2 TUNER PHONO C D
SMART SCAN CONTROLLER
DIGITAL-1 DIGITAL-2
(OPTICAL) (COAXIAL)
DIGITAL-3
(COAXIAL)
ENTER
PHONES
MASTER
VOLUME
MAX
TREBLE
A-DS650
TREBLE
Assigning the digital inputs to input selec-
tor buttons:
1. Press an input selector button (other than the TAPE-2
C D
MONITOR,
PHONO button).
2. Press the DIGITAL AUDIO SELECTOR button.
The current selection appears on the display. (See the
illustration on the left for the options.)
3. Turn the SMART SCAN CONTROLLER until the
number of the digital input appears, then press the
ENTER button.
4. With the assignment complete, press the input selector
button to automatically select the digital input.
To cancel a digital input assignment, press the corresponding
input selector button, then press the DIGITAL AUDIO
SELECTOR button. Turn the SMART SCAN CONTROL-
LER to select ANALOG, then press the ENTER button.
•
Even when the digital inputs are used, the analog connect-
ing cables must be left in place. Otherwise, the multi-room
remote system, TAPE OUT, and REC OUTs will not work.
(See page 8.)
•
When a Dolby Digital source is played, for example
" ", appears on the display, indicating which of the
ch
three front channels and two surround channels are avail-
able for sound reproduction.
Warning:
•
Do not play CD-ROM discs that contain computer data as
they may cause speaker damage when amplified by the
amplifier.
•
The multi-room remote system, TAPE-1 and TAPE-2
REC OUTs can output signals from analog sources, but
not from digital sources. If your DVD player or a compo-
nent equipped with digital output has both analog and
digital outputs, connect both of them so that you can lis-
ten to and record both signals at the same time.
Listening with headphones
You can connect stereo headphones to the PHONES jack
using a standard stereo plug.
If you connect headphones, the unit will enter STEREO
mode will be entered automatically, and no sound will be
poduced from the speakers. If you have selected MULTI-CH
INPUT, you will hear only the audio from FRONT L and R
of MULTI-CH INPUT.
SUBROOM
SENDING/
A B LEARN
LEARNING
TEST SUR
POWER SLEEP DIMMER TONE MODE
SOURCE SELECTOR MULTI-CH MULTI-CH
DVD VIDEO-1 VIDEO-2 INPUT
TAPE-1 TAPE-2 TUNER PHONO C D
INPUT
PROGRAMMABLE AREA TV/VIDEO
POWER C H VOLUME
POWER TV/VCR
SOURCE
TUNER
GROUP PRESET
CD
TAPE
SELECTOR
DISC
SUBTITLE DVD
ON/OFF
PAUSE
/STEP CH SEL
VOLUME
LEVEL VOLUME
π/†
MUTING
/REMOTE
SPEAKER
REMOTE CONTROLLER RC-374M
MULTI-CH INPUT, TUNER, or
17