Connecting The Base Station To The Pabx/Router - Gigaset S820 User Manual

Connecting the base station to the PABX/router

Connecting the base station to the PABX/router
Router operation
You can reduce the echoes that may occur when using the analogue connection of a router by
activating XES mode 1
press the echoes.
The normal mode (default) should be activated if you do not experience any problems with ech-
oes.
Menu key v ¤
*#05#70
¤
è for Normal mode
Or:
¤ ¤
è for XES mode 1
Or:
¤ ¤
è for XES mode 2
2
Operation on a PABX
To find out which settings are required for your PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line Identifica-
tion.
Recall
¤
Menu key v
Settings menu page
¤
Select flash time ( ´ = set value)
Saving an access code (outside line code)
If you have to enter an access code before any external number on your PABX, e.g., "0":
¤
Menu key v
Settings menu page
¤
Code to access line
¤
Use ( ´ = selected):
¤
Never: Deactivate the access code.
Or:
¤
Calls from Call Lists: The access code should only be prefixed when dialling from a list (SMS,
calls, answer machine (Gigaset S820A)).
Or:
¤
All Calls: The access code should be prefixed to every number.
* XES stands for "eXtended Echo Suppression".
56
*
. You can activate XES mode 2 if XES mode 1 does not sufficiently sup-
¤
« Telephony
¤
« Telephony
¤
Enter the access code (max. 3 digits) and touch è to confirm
¤ ¤
è Delete current setting: ç
¤
Recall 
¤
Access Code 
¤
0