General Setup - Draytek Vigor 2110 Series User Manual

4 . 2 . 2 G e n e r a l S e
4 . 2 . 2 G e n e r a l S
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
1st IP Address
1st Subnet Mask
DHCP Server
Configuration
t u p
e t u p
Type in private IP address for connecting to a local private network
(Default: 192.168.1.1).
Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network so
it automatically dispatch related IP settings to any local user
configured as a DHCP client. It is highly recommended that you
leave the router enabled as a DHCP server if you do not have a
DHCP server for your network.
If you want to use another DHCP server in the network other than
the Vigor Router's, you can let Relay Agent help you to redirect the
DHCP request to the specified location.
80 Vigor2110 Series User's Guide