Braun ThermoScan PRO 6000 Directions For Use Manual page 13

5 Press and release MEASURE button.
The thermometer will beep once, running dashes will appear
on the display then the green ExacTemp light will flash,
indicating consistent probe position.
Note: Always press the MEASURE
a measurement.
6 Temperature measurement.
steady green ExacTemp light will signal the end of the
measuring process.
The temperature will show on the display.
If the thermometer is unstable or patient is moving during the
measuring process, the device will beep, the green ExacTemp
light will flash and POS (Position Error) will flash on the display.
Be sure the device is stable and restrict patient movement
for the next measurement. Change the probe cover to reset.
* See 12. Errors and notifications
button before taking
A long beep and
12