Remote Beep - Viper 5806V Owner's Manual

Hide thumbs Also See for 5806V:
Table of Contents

Advertisement

Page Mode
Options: Power Save 1, Power Save 2, ON, OFF
Paging is how the Responder LE remote monitors your system's mes-
sages. Power Save extends battery life by turning paging off after one
week if the remote control is not used during this period. Just press any
button to resume system monitoring. Power Save 2 is for maximum bat-
tery life and will monitor the system only when remote start has been
activated. Caution: Alarm trigger messages will not be received when
remote start is off. When set to ON it wakes up every few seconds to
listen for pages from the system. When set to OFF it does not wake up
to receive remote start or alarm trigger pages.
Note: When off, responses are still received when a command is
performed but alarm trigger pages will not be received.
Car 2
Options: OFF, ON
The Responder LE and 1-way companion remote controls can control
two systems independently. When set to OFF, the Car Select feature
is not available. When set to ON the Car Select feature is enabled.
See ""Car Select" on page 37" for details on using a remote with
two systems.

Remote Beep

Options: ON, OFF, Triggers Only
The Responder LE emits a beep as confirmation of button presses and
command responses. When set to OFF, beeps are not emitted for any
© 2016 Directed. All rights reserved.
21

Advertisement

Table of Contents
loading

Table of Contents