Viper Home 504S Quick Reference Manual

Indoor siren

Download this manual

Quick Reference Guide

Congratulations on the purchase of your Viper

Home Security Accessory. This guide walks you

through the process of adding this accessory to your

system and for mounting your accessory.

Note: Make sure you already have a Viper Home

Starter kit or Viper Home Hub installed. Please refer

to the quick reference guides found in these sys-

tems, or visit: www.viper.com/home/support.

Log into your Viper Home account at:

To pair the siren to your system:

Click on the "Devices" tab

Click "Add New Device"

Click "Add Siren"

You are then prompted to insert the batteries

provided within three

minutes. First, remove

the mounting piece/bat-

tery cover on the back of

the siren, and install the

AA batteries provided.

Once the batteries are

inserted the system automatically connects and

confi rms the siren is paired with your system.

After the siren is paired, you can give it a

504S Indoor Siren

home.viper.com

Table of Contents

Page 1: Quick Reference Guide
Note: Make sure you already have a Viper Home Starter kit or Viper Home Hub installed. Please refer to the quick reference guides found in these sys- tems, or visit: www.viper.com/home/support.
Page 2: Mounting Instructions
unique name (i.e. “Hallway”) Once completed, click the “Finish” button. The siren is now ready for mounting. Mounting instructions: Mount the siren in a location where it will be heard and act as a deterrent to potential intruders. A good location to mount the siren is near your doorbell ringer or near an area that is consid- ered a potential access point by an intruder.
Page 3: Additional Information
Additional Information Further information – For additional support, including additional information videos and installa- tion tips, visit: www.viper.com/home/support Warranty Information - Your system comes with a one year warranty. For complete warranty details visit: www.viper.com/home/support This device is intended for indoor use only and should not be mounted in any outside areas.