Standard Remote Configuration; 2-Button Transmitter; Remote Learning - Viper 3121V Owner's Manual & Install Manual

Standard Remote Configuration

Function
Arm
Disarm
Panic
Aux Output
Tilt bypass
All Sensor Bypass
Anti-Jacking (On & Off)
Valet mode

2-Button Transmitter

Remote Learning

In case the remote is lost, or you want to add another remote (up
to 4 max), perform the following procedure:
With the system disarmed, turn the ignition ON & OFF 5
1.
times within 15 seconds, and stay in the ON position on
the fifth time you turn the ignition ON. 3 seconds later the
Siren will chirp 3 times to indicate the system entered remote
learning mode.
Press any button on the remote. The siren will chirp the num-
2.
ber of times corresponding to the sequence of the remote
location in the system. For example, the first remote learned
2
Button Action
Press and release
Press and release
Press and hold (any system state)
A U X
A U X
Press and release (any system state)
+
Press and release within 5 seconds of arming
system
Press and release 2 times within 5 seconds
A U X
A U X
of arming system
A U X
Press and hold (ignition on & system
disarmed)
A U X
Cycle ignition on & off twice, then press
+
and release
A U X
A U X
A U X
A U X
© 2017 Directed. All rights reserved.