Table of Contents
Advertisement
operations except programming. For Triggers Only, beeps will only be
emitted for Full Trigger messages.
For 1-way companion remote control, OFF will delete all beeps ex-
cept when programming.
To save changes and exit the remote feature programming mode,
press the
shuts off confirming exit.
Sensor Adjust
To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed Dealer performs all sensor adjustments.
Remote Pairing Mode
The following instructions step you through the remote pairing opera-
tion of the Responder LE 2-way or 1-way companion remote.
Prepare the vehicle system for pairing:
1.
Open at least one of the vehicle's doors.
Turn the key to the ON position.
2.
Within five seconds press and release the Control Center button
3.
one time.
Within five seconds, press and hold the Control Center button.
4.
The status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
5.
Release the Control Center button and proceed below.
Prepare the remote control for pairing:
6.
Enter programming by pressing and holding the
eight seconds to access the Main Menu..
Press and hold the
7.
22
AUX
button once and then press and hold. The transmit LED
AUX
button for one second, three transmit LED
AUX
© 2016 Directed. All rights reserved.
AUX
button for
Advertisement
Table of Contents
