Turbo Timer Mode - Viper 5806V Owner's Manual

Hide thumbs Also See for 5806V:
Table of Contents

Advertisement

4.
The parking lights flash several times to confirm MTS mode en-
able and the remote start activates the ignition outputs. The Re-
mote Start LED and ON tones play to confirm.
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
6.
Exit the vehicle, close all the doors and arm the system.
7.
The engine turns off and after a few seconds, the Remote Start
LED and OFF tones play to confirm. If the door is opened in Step
3 then the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1.
With the engine running, set the parking brake.
Press the optional dash mounted activation button or perform
2.
the Timer Mode command (for manual transmission vehicles see
previous MTS Mode section).
3.
The parking lights turn on and the remote start activates the igni-
tion outputs. The Remote Start LED and ON tones play to confirm.
4.
Turn Off and remove the key from the ignition switch, the engine
remains running.
Exit the vehicle, close all the doors and arm the system.
5.
6.
The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
32
© 2016 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents