System; Date/Time - Gira G1 Installation And Operating Instructions For The Installer

Settings
4.1.2

System

1 Touch the [System] button in the System menu.
The [System] page is opened.
?
? The following menu items are available:
- Date/time [see 4.1.2.1]
- Configuring WLAN [see 4.1.2.2]
- Configuring network [see 4.1.2.3]
- Network connection type [see 4.1.2.4]
- Setting proximity sensor [see 4.1.2.5]
- Reliable KNX communication [see 4.1.2.6]
- Starting KNX programming mode
You can start or finish KNX programming mode using the slide switch.
The programming LED lights up when programming mode is activated.
4.1.2.1

Date/time

Here, you can set the display format for the time and date in the status bar.
1 Time: Select between 12 and 24-hour format.
2 Date: Set the required date format and confirm with [OK].
The selected formats are displayed directly in the status bar.
?
Gira G1 installation and operating instructions
0.258 21/2015
Figure 11
System settings
Figure 12
Time/date
14