Activating And Deactivating All Switching Times Of A Function - Gira G1 Installation And Operating Instructions For The Installer

Operating KNX building functions
6.11.3

Activating and deactivating all switching times of a function

1 Set the [all active] switch to [I] for activating, or to [O] for deactivating.
2 Touch the [OK] button.
? The function from which you switched to the [Timer switch overview] page
is opened. All switching times of this function are activated or deactivated.
Tip
Temporarily deactivating switching times
If you want to deactivate individual switching times of a function temporarily,
you can simply deactivate all days (set them to gray).
Gira G1 installation and operating instructions
0.258 21/2015
Figure 42
Activating all
switching times/
deactivating
46