Blind Positioning; Tile View - Gira G1 Installation And Operating Instructions For The Installer

Operating KNX building functions
6.5

Blind positioning

6.5.1

Tile view

1 To move the blind up or down in stages, touch the up or down button.
The blind moves to the required position.
?
1 To move the blind up or down to the limit position, give the up or down button
a long press.
? The blind moves to the top or bottom limit position.
Note
Adjusting slats is not possible in the tile view
Adjusting slats is not possible in the tile view. To do this, switch to the detailed
view by touching the tile.
Gira G1 installation and operating instructions
0.258 21/2015
Figure 33
Blind positioning
Left: Tile view
Right: Detailed view
Moving blind in
stages
Moving blind
Adjusting slats
35