# Statistical Type Selection; Statistical Data Input; Editing Statistical Sample Data - Canon X Mark I Pro User Instruction

## Statistical Type Selection

There are 8 types of Statistical Calculation, after entering the
Statistical Type Selection screen, press the number to select the
type of Statistic Calculation.
Pressing Key
1 (SD)
One-variable statistics (x)
2 (Lin)
Two-variable, Linear regression (y= A+Bx)
Two-variable, Quadratic regression (y=A +Bx + Cx
4 (Log)
Two-variable, Logarithmic regression (y=AxBlnx)
5 (e EXP)
Two-variable, E exponential regression (y=Ae
6 (ab EXP)
Two-variable, ab Exponential regression (y=AB
7 (Pwr)
Two-variable, Power regression (y=Ax
8 (Inv)
Two-variable, Inverse regression (Y=A+B/x)

### Statistical Data Input

After confirmed the calculation type in the Statistical Type
Selection screen or by pressing
mode, the following Statistical Data Input screen will be shown.
1-variable STAT
2-variable STAT
Statistical Calculation
B
)
(Data) in the STAT
1-variable STAT
"FREQ ON"
• After turning on Data Frequency in the setup menu, the
"FREQ" column will be added into the above screen.
• The following are the maximum number of lines for data input.
Statistic type
Single Variable (only x input)
2 Variable (x & y input)
• Input expression and display result values in the Statistical
Data Input screen are in Line mode (same as Comp mode
with Line mode status).
• After inputted the data, press
statistical registers and display the value (max. 6 digits) in the
cell. You can press cursor key to move the cursor between
each cell.
)
2

### Editing Statistical Sample Data

Bx
)
Replacing the Data in a Cell
(1) In the Statistical Data Input screen, move the cursor to
x
)
the cell you want to edit.
(2) Input the new data value or expression, and press
Deleting a Line
(1) In the Statistical Data Input screen, move the cursor to
the line you want to delete.
(2) Press
Inserting a Line
(1) In the Statistical Data Input screen, move the cursor to
the line that will be under the line being inserted.
(2) Press
(3) Press
Deleting All STAT Data Input
(1) Press
(2) Press
16
FREQ ON
40
26
to store the value into
(Edit)
(Line)
(Edit)
(Del-A)
FREQ OFF
80
40
.