Least Common Multiple And Greatest Common Divisor; Prime Fractorization; Quotient And Remainder Calculations - Canon X Mark I Pro User Instruction

Random Number Generation
: Generate a random number between 0.000 and
0.999. And the display result will be fraction format
in Maths mode status.
: Generate a random number between two specified
positive integers. The entry is divided by "."
EX #25
*The value is only a sample, results will differ each time.

Least Common Multiple and Greatest Common Divisor

LCM: Calculate the least common multiple among
(maximum) three positive integers.
GCD: Calculate the greatest common divisor among
(maximum) three positive integers.
EX #26
Prime Factorization
• The factor a positive integer up to 10 digits into prime
factors up to the 3 digits.
Ptact Number : 0 < X < 99999 99999 (X is integer)
• The reminder part that cannot be factored will be
enclosed in parentheses on the display.
Example: 99999 99999 = 3
EX #27
2
x 11 x 41 x 271 x (9091)
NOTE:
• During any calculation operations, pressing
or
or
result display.
• Use the setup menu to change the angle unit setting
(Deg, Rad, Gra) or display digit setting (Fix, Sci, Norm).
• [Math ERROR] will be shown if decimal value, fraction,
negative value calculation result, or Pol, Rec, Q...R is
displayed.

Quotient and Remainder Calculations

"Quotient" (Q) is the result of a division problem, "Remainder"
(r) is the value remaining in an integer division problem.
The calculated quotient value (Q) and remainder (r) will be
stored into memory variables "C" and "D" automatically
assigned.
In Maths mode, press
result.
In Line mode, the quotient value (Q) and remainder (r) will be
shown over 2 line.
Only Quotient Value (Q) can continue to be used for the next
calculation or be stored into memory variables. ......
13
key will exit the prime factorization
or
to scroll a long calculation
or
EX #28