SHOWTEC Sunstrip Active DMX User Manual page 12

Selecting the Intensity (Dimming) Mode
To adjust the output intensity, you must activate the Chase Dimmer Mode.
Hold the MENU button until the display shows "d" followed by 2 digits
Setting the Intensity
Use the UP or DOWN button to change the setting from 00-100.
A value of 000 means the weakest output intensity and a value of 100 means
the highest output.
Auto
The Sunstrip will play all built-in programs, one after the other.
Full
All 10 lights on the Sunstrip will light up and stay on at 100%.
10