Casio XJ-V100W User Manual page 30

Use this menu item:
Option Settings 2
Audio Out
Option Settings 2
High Altitude
Option Settings 2
Control Panel Lock
Option Settings 2
Closed Caption (V)
Option Settings 2
Timer Function
Option Settings 2
Microphone Input Level
Option Settings 2
Restore Menu Defaults
Multimedia Settings
Autorun
Multimedia Settings
Functions (FN)
Multimedia Settings
Internal Storage Function
(RCVHD)
Network Settings
Operational Info
Restore All Defaults
Unit Operating Time
To do this:
Use this sub-menu to specify whether audio input from the input sources below
should be output to the speaker (Speaker*) or output to an external destination
1
(Line)* .
 HDMI
 File Viewer (Movie playback audio)*
 Wireless or Network (Video stream projection movie audio)*
 USB Display*
2
*1 When Line is specified, the projector will output audio from its AUDIO OUT
terminal.
*2 Network models only
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
 Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Disable projector unit key operations.
See "Control Panel Lock (XJ-F Series Only)" (page 35) for more information.
Use this sub-menu to specify whether to display closed captions when projecting a
video signal that includes them.
Off*: Closed captions not displayed.
CC1, CC2, CC3, CC4: Indicates the current closed caption output setting (CC1,
CC2, CC3, and CC4).
Note
 Keystone correction does not affect displayed closed caption text.
Display the timer function menu. For details, see "Using the Presentation Timer
(TIMER)" (page 23).
Adjusts the volume level of audio input from the MIC terminal within the range of 0*
(mute) to 3 (maximum).
Return all of the items in the "Option Settings 2" main menu to their initial defaults for
the currently projecting image source.
Specify whether to use (Enable*) or not use (Disable) the autorun function. For
details, see "Autorun" (page 52).
Display the same menu (Function Menu) that appears when the remote controller's
[FUNC] key is pressed.
Access projector internal memory from a computer. For details, see "To copy files
from a computer to projector internal memory" (page 37).
Access projector wireless LAN connection setting and network setting items. For
details, see the separate "Network Function Guide".
Display the projector information below.
Input Signal, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency,
Scan System, Light Time, Version (projector ROM version)
Display the cumulative operating time of this unit.
This time cannot be initialized.
2
30
2