Supplying Power To External Equipment (Xj-F Series Only) - Casio XJ-V100W User Manual

Supplying Power to External Equipment
(XJ-F Series Only)
Power can be supplied to external equipment via the USB-A/DC 5V port of an XJ-F20XN, XJ-F200WN,
or XJ-F210WN model projector, or via the DC 5V port of an XJ-F10X or XJ-F100W model projector.
Important!
 Turning off projector power also cuts power being supplied to external equipment. Note that
power being supplied is also cut when the projector is turned off due to restarting by its
self-check function or Auto Power Off, due to some error, or for any other reason. Depending
on the external equipment being used, cut off of the power supply may cause data that is
being edited to be lost or corrupted. Make it a habit to frequently save data on external
equipment being powered by the projector.
 Projector power being turned off by Auto Power Off (page 29) also causes power to external
equipment to be cut off. Before starting power supply to external equipment, be sure to select
"Off" for the setting "Option Settings 1
 For a list of external equipment whose operation has been confirmed while being powered by
the projector, visit the CASIO projector website (http://www.casio-intl.com/support/). Proper
operation is not guaranteed for any external device that is not included in the list at the CASIO
projector website.
 Though power up to 5V DC 2A can be supplied to other devices not included on the CASIO
website, note that doing so may make some functions unavailable on some devices. Before
using output from this port to power another device, be sure to check the user documentation
of the device and make sure you connect it correctly. Particular care is required when
connecting a chargeable battery to this projector's USB port power supply. Incorrect
connection creates the risk of explosion, fire, and smoke.
 Note that CASIO COMPUTER CO., LTD. shall be held in no way liable for any loss or
corruption of data stored on an external device connected to this projector's USB port power
supply, or for any damage, smoke generation, or fire occurring on the connected device.
Note
 To temporarily blank projection while maintaining power supply from the projector to external
equipment, press the [BLANK] key. For more information, see "To momentarily blank the
image and mute the audio (BLANK)" (page 17).
Auto Power Off" to disable Auto Power Off.
75