Projecting Files From A Memory Device Connected By Usb; To Connect A Usb Flash Drive To The Projector; To Connect A Memory Card To The Projector - Casio XJ-V100W User Manual

Projecting Files from a Memory Device Connected by USB

Use the procedures in this section when you want to use File Viewer to project image files, movie files,
presentation files, or PDF files from a USB flash drive or other memory device.
Supported Memory Devices
The Data Projector's USB-A port supports connection of a FAT/FAT32 format memory device
supported by the USB interface. The following are supported memory devices.
 USB flash drive
 Memory cards
A commercially available USB card reader is required to connect a memory card to the Data
Projector.
 USB storage class (USB Mass Storage Class) compatible digital cameras

To connect a USB flash drive to the projector

Connect USB flash drive to the Data Projector's USB-A port as shown below.

To connect a memory card to the projector

1.
Load the memory card into a USB card reader's card slot.
 For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
2.
Connect the USB card reader to the Data Projector's USB-A port.
41