Casio XJ-V100W User Manual page 64

Supported Operations during Projection over a USB connection
The operations described in the table below are supported on the CASIO USB Display window during
projection.
To do this:
Start (resume) computer screen projection
Freeze computer screen projection
Stop computer screen projection and project the USB
display standby screen
Start audio output from a computer*
Mute audio output from a computer*
Output the computer's main screen on the projection
screen
Output the computer's extended screen on the
*
1 2
projection screen*
Minimize the CASIO USB Display window
Exit the CASIO USB Display window
Display CASIO USB Display version information
*1 With Mac, installation of driver software is required to enable these functions. See "Add-on Driver
Software for Mac OS" (page 63).
*2 This operation is disabled under Mac OS 10.6. With Windows XP and Windows Vista, installation of
driver software is required to enable these functions. See "Add-on Driver Software for Windows"
(page 62).
Perform this operation:
Click
Click
Click
1
Click
Out" so there is a check mark next to it.
1
Click
Out" to remove the check mark next to it.
Click
Projection Screen"
Click
Projection Screen"
Click
(1) Click
(2) On the confirmation dialog box that appears, click
Click
64
.
.
.
. On the menu that appears, select "Audio
. On the menu that appears, select "Audio
. On the menu that appears, select "Select the
"Main Screen".
. On the menu that appears, select "Select the
"Extended Screen".
.
. Or you could click
"Exit" on the menu that appears.
the [OK] button.
 This stops computer screen projection and
projects the "USB Display" standby screen.
. On the menu that appears, select "About".
and then click