Quick Start - Source Audio Soundblox Pro User Manual

QUICK START

1. POWER
To power the unit, connect the included
the jack
9V DC
could damage the unit and void the warranty.
2. GUITAR/AUDIO CONNECTIONS
Next, plug your bass (or other instrument) into the jack labeled
via a standard ¼" cable. Connect your amp (or other audio device)
IN (B)
to the
GUITAR OUT
and output are mono signals.
3. SENSOR IN (optional)
To use your
BEF
SENSOR IN (D)
SENSOR
IN
D
4. BRIEF KNOB AND PEDAL DESCRIPTIONS
See Controls section for more details.
selects desired filter type
A EffEct:
B SwEEp RANgE:
filter sweep or the depth of the
c fREquENcy:
4 | Quick Start
on the back panel. Note: Using a different supply
(A)
jack , again with a standard ¼" cable. Both input
(C)
Pro with a Hot Hand sensor, connect the sensor to the
jack and follow any instructions given with the sensor
GUITAR IN EXP IN
B
adjusts the direction (up/down) and breadth of the
adjusts the center frequency of the filter
adapter power supply to
DC
MIDI IN
SENSOR
GUITAR OUT
c
and Hot Hand modulation.
LFO
GUITAR
OUT
9V DC
A