Advertisement
SPECIFICATIONS
Dimensions
L: 7 inches (18.1cm)
•
W: 6 inches (18.1cm)
•
H: 2 inches (including knobs)
•
Total including knobs:
H: 2.125 inches (5.5cm)
•
weight
1.75 lbs
•
TROUBLESHOOTING
Noise
Near noise source
Other equipment
Bad cables
Hot Hand doesn't work
Not calibrated properly
Not connected
Knobs don't work /light up
Wrong power supply
For additional assistance, please visit www.sourceaudio.net.
If possible, dispose of the device at a recycling center. Do not dispose of the device
with the household waste.
For full compliance with EN 61000-4-6 standard, input cable must be less than
3 meters in length.
power
110mA @ 9 VDC (max 145mA w/ Hot Hand
•
Wireless Adapter)
• NEGATIVE
Audio performance
115dB DNR audio ADC
•
24-bit audio conversion
•
56-bit digital data path
•
Analog bypass
•
Move pedal away from power supplies and other equipment.
Remove other effects from signal chain, see if noise persists.
Swap out audio cables.
Calibrate the Hot Hand - see page
Check Hot Hand connections.
Use correct power supply as defined on pages
tip power jack
.
20
Specifications and Troubleshooting | 27
.
4 and 8
Advertisement
Need help?
Do you have a question about the Soundblox Pro and is the answer not in the manual?
Questions and answers