Source Audio Soundblox Pro User Manual page 21

BACKPAGE PARAMETERS
The Pro has some additional editable parameters accessible via
BEF
the special Backpage mode. Pressing the
buttons simultaneously enables the Backpage mode, as indi-
ENABLE
cated on the main control panel. All Modulation Source
Tap Tempo Enable
mode. The Backpage mode can be exited by pressing the two buttons
simultaneously again.
In Backpage mode, the
functions and the displays will change to indicate the parameter values.
For the display, there are two letter abbreviations above the columns
EQ
that indicate the parameter controlled in Backpage mode. Select the
parameter to be edited with the left and right Band Select buttons and
adjust the value with the knob.
To return to the default Backpage settings, press both Band Select but-
tons at the same time. All Backpage parameters will return to factory
default settings. Unless otherwise noted, all Backpage parameters are
save per preset.
-
Continued
will be lit to indicate that the unit is in Backpage
LED
MOD
BACKPAGE
SOURCE
MODE
TAP TEMPO
ENABLE
controls and the Effect knob take on different
EQ
(XD) (XC) (OE) (VA)
+12
0
-12
62 125 250 500 1K
<
and
MOD SOURCE
LED
ENVELOPE
LFO
HOT HAND
(HOLD)
CALIBRATE
(Q) (EL) (LS)
USER
2K 4K
>
Backpage Parameters | 21
TAP TEMPO
s and the