Source Audio Soundblox Pro User Manual page 25

EQ Location (EL)
There are two possible
lowest in the
LED
ting, which places the
wet and dry signal. Selecting the other
to the wet signal, leaving the dry signal unaffected.
LFO Shape Control (LS)
The Pro offers nine different
BEF
pedal's faceplate, a graphic of each
corresponding
LED
1.
USER
2.
3.
4.
5.
6.
7.
8.
9.
Except for the random steps, all waveforms complete their entire cycle in
the same amount of time. The random step waveform does four steps in
that time interval.
The User Downloadable Step Sequence can be customized and saved to
the pedal via an upcoming software tool that will be available on the
Pro product page at www.sourceaudio.net
-
Continued
locations within the pedal's signal chain. The
EQ
Location column signifies the factory default set-
EQ
after the mix control, thereby affecting both the
EQ
LFO
selector position. The available
User Downloadable Step Sequence with Up to
16 Steps (factory set to 6 Step Triangle).
Random Steps
8 Step Triangle
4 Step Triangle
4 Step Saw
Square
Rectified Sine
Rising Saw
Sine
position applies the
LED
shapes. Within the
shape has been placed next its
LFO
LFO
Backpage Parameters | 25
only
EQ
box on the
EQ
shapes are:
BEF