Source Audio Soundblox Pro User Manual page 11

CONTROLS: OTHER BUTTONS
PRESET BANK
There are six available user presets in two banks. Switch between banks
by pressing the
PRESET BANK
pressing the corresponding footswitches will select presets
When preset bank
. The indicator lights above each footswitch alternate from green for
6
bank to red for bank
A
MOD SOURCE
Pressing this button selects between the three choices of modulation
source: Envelope,
modulation source, press and hold the
Hot Hand Calibration procedure. (See the Use with Hot Hand section for
calibration instructions).
TAP TEMPO ENABLE
When is selected as the modulation source, press this button to
LFO
enable Tap Tempo Mode. The rightmost footswitch will be converted to
a tap tempo control. Press the
tap tempo. Tap tempo only applies in
button. When preset bank
is selected, the footswitches select presets
B
.
B
Bank A
1-3
PRESET BANK
, and Hot Hand. When Hot Hand is selected as the
LFO
TAP TEMPO MODE
BACKPAGE
SOURCE
MODE
TAP TEMPO
ENABLE
Bank B
4-6
MOD SOURCE
button again to disable
mode.
LFO
ENVELOPE
LFO
HOT HAND
MOD
(HOLD)
CALIBRATE
Controls: Other Buttons | 11
is selected,
A
, , or .
1 2 3
, , and
4 5
button to start the