Panasonic CF-73 Series Reference Manual page 67

SD Memory Card
• Remove the labels on the card / Attach other labels or stickers to the card
Do not leave the card in the following locations:
• Locations that can become very hot, such as inside a car that can become hot, or in
direct sunlight.
• Dusty locations or locations that are very humid.
• Locations subject to corrosive gas, etc.
When logging on to Windows / resuming from standby or
hibernation mode
Do not remove or insert the SD Memory Card until Windows has completed loading.
After resuming from standby or hibernation mode, do not access the SD Memory Card for
about 30 seconds.
Protecting important data
Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user,
or any other damages, direct or indirect.
Set the write-protect switch (A) to the LOCK position. Unlock the switch when you want to
record (checkout), edit, or save data.
When removing the SD Memory Card, be sure to follow the procedure (
described in this manual.
Do not remove the card or turn off the computer in the following cases. If you do so, data
stored in the card may be damaged, or it may not be possible to properly access the card
the next time it is inserted.
• While data is being read from the card
• While data is being written to the card, or for a short time after the writing operation
• While the SD Memory Card indicator
We recommend backing up important data to another storage medium.
When disposing of cards, we recommend that you physically destroy the card (for
example, using a hammer) to prevent personal or confidential data from being leaked.
is lit
67
page 69)