Panasonic CF-73 Series Reference Manual page 120

Setup Utility
NOTE
When the Setup Utility is started up with the User Password;
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not
be displayed.
• [Execute-Disable Bit Capability], [Password on boot], [SD Startup], [SD Setting
Method], [Setup Utility Prompt], [Boot First Menu] and [User Password Protection]
will be displayed, but cannot be set.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
Parameters
(An Underline indicates the factory default settings.)
Execute-Disable Bit Capability
Password on boot
SD Startup
SD Setting Method
Clear registered SD card
Set Supervisor Password
*4
Setup Utility Prompt
Boot First Menu
*5
Hard Disk Lock
User Password Protection
*5
Set User Password
*3 Disable
Enable
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
To the sub-menu
To the sub-menu
Disable
Enable
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu
120